ZYCOO 4FXO U50 U100 4 FXO module with 4 FXO interface (Analog Trunk)
The Analog Trunk FXO is an interface that connects to a trunk line, like the one from your service provider. It receives ringing voltage and battery from FXS devices. ZYCOO 4FXO U50 U100 4 FXO module with 4 FXO interfaces are used to connect your PBX to the PSTN. One FXO channel is required for each line you receive from your telco.
The Analog Trunk FXO provides connectivity to analog central office loop start trunk line analog interfaces. And it can be combined with BRI, PRI, GSM module. Typically, a phone is connected to a loop start line from the Telco and is, by default, in an on-hook state. When the phone goes off-hook, the phone completes the line circuit, and the current flows through the line. The Telco provides an audible dial tone to the phone and accepts dual-tone multi-frequency (DTMF) digits from the caller.
The Central Office Interface Circuit (COIC) is the heart of the loop start Analog interface, and takes the place of a telephone when connecting to the Telco.
Loop start Analog Interface features
- Detects ringing when on-hook -Detects loop current when off-hook
- Detects when tip/ring voltage crosses a set voltage when on-hook or off-hook (called DC triggering)
- Can accommodate private branch exchange (PBX) with 48 V battery voltage -Loop current range: 13-110mA
- The voltage detection threshold is software-selectable
The 4FXO module applies to CooVox-U50/U100V1, U80, U50/U100V2 IP Phone System; It has 4RJ11 ports for PSTN line connection. Each port has one LED(Light-Emitting Diodes).
The LED indicates port status as under:
- Solid = Module loading successful
- Blink = Channel Ringing
If the LED is off, the FXO module is loading failed.
Environmental Operation Information
Temperature: Humidity: 5% ~ 95% Non-Condensing
88.5 x 132 mm